Model : VeneerPlus II
Longitudinal Veneer Splicer (integrated gluing system) for thick veneers
Product Introduction

INNOVATOR’s VeneerPlus II, different from the traditional paper taping or zig-zag thread stitchers, is used to accurately and firmly bond veneer edges with no visible joint line. VeneerPlus II, the same as VeneerPlus, is equipped with the integrated gluing system inside. It’s particularly suitable for the furniture industry and high-end decorative plywood to splice up to 5 mm thick veneers with the integrated gluing system. After the well cut and trimmed veneer strips with a 90-degree jointing angle on the jointing face of veneer edges are aligned evenly by the synchronized infeed rollers, the veneers are directly conveyed to the singular gluing unit for gluing edges and then transported to the heating section for glue curing. With this VeneerPlus II, the veneer gluing and splicing processes can be accomplished within one single machine. Coupled with INNOVATOR’s Double Knife Veneer Guillotines (CutMate D series), a perfect veneer cutting and splicing work can be achieved.

Features

  • complied with European safety standards
  • precise cooling system for prolonging glue pot life
  • rigid welded machine body for stable splicing work
  • easy adjustment and quick access of integrated gluing system
  • special-designed pressurized and heating mechanical structures
  • particular infeed roller structure for wider range of veneer thickness
  • infeed stopper device for smoother feeding of thick veneers above 1.5 mm
  • pressure-regulating pressing roller structure for smooth feeding of thick veneers
  • the latest designed transporting chains of engineering plastics for reducing the heat on veneers
  • reflective photocell sensor in the infeed section to ensure a perfect alignment of the jointed veneers
  • narrow heating zone with individual temperature controllers for minimizing the heat to avoid deforming splicing veneers
  • SSR (solid state relay) heating controller, different from the heater with traditional magnetic contactor, for more accurate temperature control and longer life without sparks of contacts
ModelVeneerPlus II
Veneer Strip Thickness (depending on veneer condition) approx. 0.5 ~ 5.0 mm
Veneer Strip Length min. 350 mm
Veneer Strip Width min. 45 mm
Production Speed approx. 8 ~ 45 m/min. (depending on veneer strip thickness)
Electric Power approx. 5.5 kw
Compressed Air 5 bar
Heating Temperature 100 ~ 220 °C
Heating Zone 1200 mm
Dimensions  (L x W x H) 2200 x 2100 x 1600 mm
Net Weight approx. 1500 kg
Color RAL 7043 / RAL 9016
* Technical data is not binding and can be modified without prior notice.

Please click here if this video can not be played.