Model : TrimSmart series
Veneer Faces Trimming and Reinforcing Machine
Product Introduction

The TrimSmart series are designed for taping and trimming the edges of veneer faces for reinforcement. Operators can adjust the width of trimming heads to fit the size of veneer faces as their requirements. This machine tapes veneer sheets up with paper for reinforcement and simultaneously cuts off the waste as the final step. Combining with automatic stacker with scissor lifting table will be much more efficient for operators. The finished veneer sheets will also be stacked automatically.

  • rigid welded machine body
  • infeed and taping pressure pneumatically adjustable
  • can be connected to UltiMate series or as a single unit
  • veneer alignment via laser guide and stopper device before trimming
  • trimming from single side (right hand / left hand) or both sides available
  • trimming by roll knives with maximum veneer cutting thickness of 2.5 mm
  • clear and easy operation control panel with user-friendly PLC based interface touch screen
Recommended Option(s)
  1. automatic stacker (Veneer Face Width:max. 1400 mm)
  2. scissor lifting table with safety light barrier

ModelTrimSmart 3400TrimSmart 2800
Veneer Face Length 600 ~ 3400 mm 600 ~ 2800 mm
Veneer Face Width min. 400 mm min. 400 mm
Veneer Thickness 0.35 ~ 2.0 mm 0.35 ~ 2.0 mm
Production Speed 15 ~ 25 m/min. 15 ~ 25 m/min.
Cut-off Each Side 10 ~ 300 mm 10 ~ 300 mm
Electric Power approx. 1.1 kw approx. 1.1 kw
Compressed Air 5 bar 5 bar
Working Height 900 mm 900 mm
Dimensions (L x W x H) 4800 x 1200 x 1750 mm 4200 x 1200 x 1750 mm
Net Weight approx. 1400 kg approx. 1300 kg
Color RAL 7043 / RAL 9016 RAL 7043 / RAL 9016
* Technical data is not binding and can be modified without prior notice.

Please click here if this video can not be played.