Model : VeneerSolid M1
Longitudinal Veneer Splicer
Product Introduction

The butt-jointed longitudinal veneer splicers manufactured by INNOVATOR Machinery, different from the traditional paper taping or zig-zag thread stitchers, are ideal for processing high quality glue-spliced veneer faces. By INNOVATOR’s longitudinal veneer splicers, the well-cut and pre-glued veneer strips are fed into the machine manually for a perfect joint, especially suitable for splicing short veneers. This model which is a perfect entry level splicer for “custom shops” with lighter application requirements also meets all the splicing performance features of INNOVATOR’s veneer splicing machines. This machine is also capable of splicing components for Diamond Match applications. Combined with INNOVATOR’s Double Knife Veneer Guillotines (CutMate D series) and Double Sided Veneer Glue Applicator (GlueMate 700), a perfect veneer cutting, gluing and splicing work can be achieved.

  • with high cost-performance value
  • complied with European safety standards
  • the bottom transporting chains guided by wear-resistant rails
  • special-designed pressurized and heating mechanical structures
  • pre-glued and dried veneers required prior to feeding into the machine for jointing
  • splicing up to 3.5 mm pre-glued veneers by adjusting production speed and temperature
  • the latest designed transporting chains of engineering plastics for reducing the heat on veneers
  • reflective photocell sensor in the infeed section to ensure a perfect alignment of the jointed veneers
  • narrow heating zone with individual temperature controllers for minimizing the heat to avoid deforming splicing veneers
  • the top and bottom transporting chains driven by one single motor for synchronization with one inverter controlling the running speed
  • SSR (solid state relay) heating controller, different from the heater with traditional magnetic contactor, for more accurate temperature control and longer life without sparks of contacts
Recommended Option(s)
  1. infeed stopper device available for smoother feeding of 1.5 ~ 3.5 mm thick veneers

Veneer Strip Thickness (depending on veneer condition) approx. 0.35 ~ 1.5 mm (solutions of splicing veneers with thickness of 1.5 ~ 3.5 mm offered)
Veneer Strip Length min. 200 mm
Veneer Strip Width min. 55 mm
Production Speed up to 30 m/min.
Electric Power approx. 5.9 kw
Compressed Air 5 bar
Compressed Air Consumption 5 L/min.
Heating Temperature 100 ~ 220 °C
Heating Zone 800 mm
Dimensions  (L x W x H) 1500 x 1500 x 1500 mm
Net Weight approx. 920 kg
Color RAL 8019 / RAL 9003
* Technical data is not binding and can be modified without prior notice.

Please click here if this video can not be played.