Veneer End Jointer
.jpg "Veneer End Jointer")
Product Introduction
The Taiwan built machine, Veneer End Jointer, is used for veneer splicing across the grain. The well-cut and pre-glued veneer strips are fed into the machine manually for a perfect joint with irregular grains. The different splicing application increases the flexibility of veneer matching method. This model E1 with special-designed pressurized and heating mechanical structures applies thermosetting glue to accurately and firmly bond veneer edges with no visible joint line. It’s particularly suitable for the furniture industry and high-end decorative plywood.
Features
- complied with European safety standards
- unique positioning device for high splicing efficiency
- user-friendly control panel for clear and easy operation
- GERMANY FESTO pneumatic system for precise pressure control
- adjustable angle of working table for operator’s splicing requirements
| Model | E1 |
|---|---|
| Veneer Strip Thickness (depending on veneer condition) | approx. 0.4 ~ 1.5 mm |
| Veneer Strip Width | 65 ~ 150 mm |
| Veneer Strip Length | min. 200 mm |
| Production Speed | approx. 10 cycles/min. |
| Electric Power | approx. 2.5 kw |
| Compressed Air | 5 bar |
| Compressed Air Consumption | 36 L/min. |
| Dimensions (L x W x H) | 1200 x 900 x 1400 mm |
| Net Weight | approx. 400 kg |
| Color | RAL 8019 / RAL 9003 |
Please click here if this video can not be played.
